Gourmet, Simple, Sustainable: A Meal Perfect for Summer Entertaining

(ARA) – Summer is all about enjoying nature at its finest. On a sunny afternoon or a warm, starlit evening, a grilling get-together is the perfect way to celebrate both the beauty of the season and the bounty of fresh foods that it brings.

Gourmet Steak with Gorgonzola Thyme on your barbecue

Steak with Gorgonzola Thyme - "cooked to perfection on your barbecue"

Building a gourmet menu doesn’t mean that you’ll have to spend hours in the kitchen preparing before guests arrive. By keeping the menu simple and focused on the foods and flavors that are perfectly in season, you can showcase what makes summer special without sacrificing time spent with your guests.

When it comes to the ingredients you’ll use, take a sustainable approach by visiting local farmers markets or your own garden plot, if you have one. It’s important to remember that ingredients other than vegetables can still be sustainable and environmentally friendly.

Blue cheese varieties from Salemville, for instance, are rBGH free, contain no preservatives or chemical additives, and are sustainably produced by an Amish community in Cambria, Wisc., where cows are hand-milked twice daily without the use of machines or electricity. And since steak is the perfect main dish for a grilling get-together, look for steaks with labels with identifying information, letting you know that it is grass-fed or pasture-raised.

Plan on serving at least four dishes: a salad, a side, a main dish and a dessert. A green salad topped with rich blue cheese and herb dressing is a wonderful, fresh start to the meal. Follow it with a side dish of seasonal vegetables and cheese-topped steak.

Depending on the vegetable you choose, it’s possible to prepare both your side and main dishes on the grill, allowing you to spend more time outside with your guests. Complete the meal with a sweet treat of ripe summer fruits – baked into a rustic French galette or tossed with fresh mint as a topping for a light sorbet.

Try these recipes for your salad and steak courses and you’ll be preparing sustainable dishes that perfectly capture the essence of summer. For more recipes and grilling tips, visit http://www.salemville.com/.

Blue Cheese Salad with Blue Cheese Dressing

Ingredients:

Dressing:

  • 1/2 cup plain nonfat yogurt
  • 1/4 cup skim milk
  • 1/2 cup green onions (including green tops), thinly sliced
  • 1/4 cup Salemville Amish Blue or Salemville Smokehaus Blue cheese, crumbled
  • 1/2 clove garlic, pressed
  • 1/4 teaspoon basil
  • 1/4 teaspoon rosemary, crushed
  • Dash salt, to taste

Salad:

  • 1 large head iceberg lettuce
  • 6 slices thick-cut bacon
  • 1 cup Salemville Amish Blue or Salemville Smokehaus Blue cheese, crumbled
  • Black pepper, to taste
  • Chopped pears, walnuts, red onion and/or tomatoes, to taste

In small bowl, stir together yogurt and milk. Mix in onions, cheese, garlic, herbs and salt. Cover and chill 30 minutes or more to blend flavors.

Cook bacon until crisp and crumble into large pieces. Cut lettuce into four to six wedges. Pour blue cheese dressing over the top. Sprinkle bacon over dressing. Add additional crumbled cheese, freshly ground black pepper, chopped pears, walnuts, red onion and/or tomatoes, if desired. Makes four servings.

Steak with Gorgonzola Thyme Crust

Ingredients:

  • 2 teaspoons Worcestershire sauce
  • 2 beef tenderloin or small rib eye steaks (about 6 ounces each), cut 3/4-inch thick
  • 1 large or 2 small cloves garlic, minced
  • 1/4 teaspoon freshly ground black pepper
  • 2 teaspoons fresh thyme, chopped, or 1/2 teaspoon dried thyme
  • 1/2 cup Salemville Amish Gorgonzola cheese, crumbled

Preheat broiler. Spoon Worcestershire sauce over both sides of the steaks and let stand five minutes. Sprinkle garlic and pepper over steaks.

Place steaks on rack or broiler pan. Broil 3 to 4 inches from heat source three to four minutes per side for medium rare steak.

Remove pan from broiler. Sprinkle thyme, then cheese over steaks. Return to oven and broil two minutes, or until the cheese is golden brown.

Do you have any great summer recipes? Please add them to the comment below.

Outdoor Speaker Installation And Repair

Outdoor Speaker Installation "Polk Audio"

Installed outdoor speaker on my deck

Last year when we built our deck I had the team install two speakers on the deck. I selected Polk outdoor speakers because Polk has a good name for speakers and the price was really good compared to other speakes since they were 40% off. I always like to find things on sale if possible.

The speakers worked very well for the first few months but during the winter one speaker stopped working. I did a few quick tests but last night I decided it was time to fix my outdoor speakers.

Outdoor Speaker Installation:

This was a pretty simple installation. When they removed the soffits to install the outdoor lighting I had them run speaker wire from the speaker location to inside where my Sony Receiver is in the family room. They installed a small connection outlet near the cable tv plug. This way I just need to run speaker wire between my receiver and the speaker patch panel. I think this looks a lot better than running the speaker cable right into the back of the stereo.

Actually, they did not run speaker wire through the house. They mentioned speaker wire is not to code and they ran a cable that is certified for houses. Bascially, it is two shielded cores of copper wire. The speaker patch panel looks pretty basic as you can see from the picture and I’m guessing they got it from Home Depot or Lowe’s.

Troubleshooting The Faulty Speaker:

Speaker patch panel "for outdoor speakers"

Re-soldered wires on this patch panel to get speakers working

Here are the steps I followed to isolate and fix the problem:

  1. I swapped the speaker wire that was connected between the receiver and the patch panel and the same speaker was not working. This showed that the receiver and the speaker wire to the patch panel was fine.

  2. I swapped the two speakers and this time the other speaker was not working. This showed that both speakers were fine, which was good news.

  3. I removed the patch panel from the wall and noticed that one set of cable was attached to a small green block and the block was no longer attached to the panel. This was the problem. The other wire was soldered to the patch panel and it was fine.

  4. I soldered the wire to the patch panel and my outdoor stereo was back in operation.

Now I can listen to music on my deck again :-)

How To Lay Sod In 8 Steps (Video)

In building our second story deck there were a few areas of the lawn that got chewed up and I recently top dressed and spread grass seed. There was another area where we removed a concrete section from our old walkway and this was the perfect area to use sod grass. The video below explains how to lay sod. It is a small area of our lawn but it provides all of the steps you need sod a much larger area.

Steps I Followed To Plant Sod Grass

  1. Remove any rocks, weeds or old grass.
  2. Rake the soil to loosen it up and level it out. You can add new soil or compost to level out low areas.
  3. Water the soil just before you put the sod down, this will help it take root and not dry out.
  4. Roll the sod grass out and make sure it lines up with the existing lawn or new roles of sod.
  5. Cut the sod with a garden knife to fit it in place if necessary.
  6. Tamp the sod down once it is all in position.
  7. Water the sod and water it every day until it takes root.
  8. If it is raining you may not need to water it and if it hot and dry you may need to water it more often.

I hope found the video and the steps above on how to lay sod helpful. If you can add any other information or have a question please leave a comment below.

Plans Chicken Coop And Ideas On Economical Outdoor Lighting Solutions For Your Coop

The economy is starting to affect more and more people and therefore people are looking for different ways to save money. This can be done by a lot of different ways but two popular ones are growing your own food and getting animals to produce food. For example, many people are getting chickens to produce eggs.

While this is something minor, it is also a healthier option and more organic. It can also become a fun hobby and way to make a little extra money. I have a friend who brings his extra eggs into work and has no problem selling them. One tip here, he has people bring him the egg containers so he can reuse them. Another way to go green and save some money.

Since raising chickens to produce eggs is becoming more popular, so are plans chicken coop. There are several ways to build one without going broke and soemthing else you should consider is a cost effective way to install and run the outdoor lighitng. 

Chicken Coop Designs

You can find a variety of designs online to build your own chicken coop. Or you can choose to create your own. If creating your own design I recommend you do some research on existing plans or built coops to understand what is a good design. There are several resources online that can help you find the designs you like. You can find some free plans and some detailed plans that you will need to pay a few dollars for.

The design you have to choose is all going to depend on a few different factors. You need to consider the size of your flock to determine the size plans chicken coop you are going to need. You can find portable coops for smaller flocks as well and these ones usually don’t have floors to them. They can be relocated if you have to move or if you choose to move them to a different part of the yard or barn. Additionally, dropping from chickens are a great source of fertilizer for your yard.

Lighting Your Chicken Coop

When you have designed your chicken coop, you may be thinking about lighting around it or even inside it as well as what to make it from. Many people who have larger coops like to have a small amount of light inside the coops. This is where low voltage outdoor lighting can help you out. You can find small bulbs or small lights that are low voltage to light your coops. This helps the chickens to walk around if they need to or to get outside.

You can also opt for utilizing low voltage outdoor lighting to surround the coop. This means you can always see what is going on and a better way to keep an eye on your flock in the evening hours. This is helpful if there are any predators in the area like coyotes. If you have an outside feeder for your chickens, outdoor lighting that is not too bright can help with seeing in the evening if they decide they want to eat.

Another option for lighting your coop is solar powered lighting. The battery on the solar lighting will charge during the day and then  come on when it’s dark. This is a great way to save money on your electric bill. They also don’t have to be turned on and off, and some people tend to forget to flip a switch.

The lighting you choose should be installed properly and the cable should be buried or in a location that the chickens can’t peck at it. This is another advantage to solar powered lighting because there are no wires. For low voltage lighting you can run the wires up high or dig it deep enough that the chickens can’t get to it. 

Overall, you can find plans for chicken coop online and another great resource is your local library. When it comes to lighting you should look at your local garden or hardware store. There are also great lighting options available online.